Ⅰ. Brief introduction
The clay response switch is an energy conservation electron switches which without touch point, adopt the infrared ray, and depend on the minim infrared ray heat from body to achieve the aim that auto-controlled by power and electrical.
Ⅱ. Characteristic & Function
1. Auto- response: open when you come, and close when you left.
2. Auto-testing: adopt the photosensitive controller, it won’t response on daytime or the ray is very strong.
3. Auto- random delay: the switch will delay a few time (eg: 30’) after check and measure people in each time, this is beginning with the last function.
4. Prolong the using time of the electrical appliance: the switch control the loop, adopt the high quality electron element, without touch point, can avoid the electrical current & spark.
5. Abroad using: it can be used in corridor, porch, toilet, and balcony, carport in the basement and the other place which use auto-light, alarm installment and the other place which use the auto-control electrical appliance.
Ⅲ.Technique guideline for the working pressure:
3-1. working pressure: AC90V—250V (50 / 60HZ)
3-2. nature use up: ≤0.2W
3-3. environment temperature: -20—50°C
3-4. load power: please see the button of the switch.
3-5. packing size: 86*86*35mm
Ⅳ. Using and attention.
1. Please install the switch according to the picture, if connect the current on daytime or the ray is very strong, the switch will in the status of monitor and control after open-close for 3 times, for the strong light, the kind of switch won’t working. At this time, you can cover the face of switch with you hands or clothes to make it influence.
2. If on dark or the light is very weak, switch will connect the load immediately (won’t open/close run 3 time).
3. It will have an initializing time about 1 minute after connect the electrical source, and working smoothly after 1 minute
|
|
|
|
|
