Ⅰ. Brief introduction
The light control switch is an energy conservation electron switches which without touch point; can testing the luminosity automatic (the luminosity can be changed), through the strong or weak light to auto-control the electricity.
Ⅱ. Characteristic & Function
2-1. auto-testing: if have some sound (clap hands, shout，ect.) near the switch, the switch and electrical equipment will open immediately.
2-2. Prolong the using time of the electrical appliance: the switch control the loop, adopt the high quality electron element, without touch point, can avoid the electrical current & spark.
2-3. abroad using: the auto-delay illumination of this product can be applied in much kind of place (corridor, balcony, channels, billboard, street light, light in park, and so on).
Ⅲ.Technique guideline for the working pressure:
3-1. working pressure: AC90V—250V (50 / 60HZ)
3-2. nature use up: ≤0.2W
3-3. environment temperature: -20—50°C
3-4. load power: please see the button of the switch.
3-5. packing size: 86*86*35mm
Ⅳ.Product installation
4-1. the switch adopt double line, can exchange with the common switch.
4-2. please ask the professional electrician to install, and note to distinguish the front line and load line before install, error connection will make the switch out of gear or mangle. Please don’t stall with cut off the electrical source.
4-3. please chooses the right place to install.
4-4. after install, please check if the load short circuit or not, the charge of electrical appliance is suitable or not, if ok, you can switch on the electrical source.
Ⅴ. Using and attention.
5-1. finish install, the switch is working after connect the electrical source, the intensity of the light will control the switch.
5-2. this switch is not suitable to use in these cases: high temperature, the pressure is not steady and dank place.
5-3. forbid connects the nil and front line into the input and output port at one time.
|
|
|
|
|
